VXDIAG All License Expired Cannot Renew Solution
Problem:
Got a VXDIAG
VCX SE Benz with other licenses, vx manager showed all licenses
have expired, but it actually works till 2030.
Cannot renew license, reflash
firmware still the same. Any solution?
Solution:
If all licenses show expired and cannot be renewed, check your system date/time. Make sure your system date is correct, then renew the license again.
You can also try a firmware reflash.
If still not working, provide S/N to
us to manually renew license.
VXDIAG VX Manager Detects Device but Offline Icon Solution
Problem:
The vx manager detected the VXDIAG VCX SE Benz VCI information, but there was no network connection, VCI was not connected. The vx manager showed offline. Any solution?
Solution:
Vxdiagshop.com engineer did a Teamviewer check and found he did not install Passthru and Benz C6 driver.
So vx manager shows offline status.
After installing C6 driver, it shows online status and the VCX SE Benz VCI is well connected.
If vx manager says No device and offline, check solution here
VXDIAG Nissan V240 Cannot Scan System Solution
Problem:
It is an Infiniti ex35 2009 North American model. VXDIAG VCX SE Nissan Consult 3 plus v240 software is stuck on the scanning system page. How to fix it?
Try to connect to each single module, it stuck on this page and did not proceed.
Solution:
Patch issue.
Old patch (for Consult3 plus 226) is not working with the V240 or later Nissan software. Otherwise will fail to scan/diagnose systems.
Solved!
Use new patch. It communicates with system now.
What Renault Clip Version for VXDIAG VCX SE?
Question:
My Renault CLIP V222 version cannot detect vxdiag vcx se Renault DoIP cable.
Do i need older or newer version or patch or something? Driver is installed and have renault active license.
Solution:
V219 Clip version works fine.
The latest version tested working is V237. You can use both V219 or V237.
vxdiag works with CLIP 237. Just need to use
proper driver.
contact vxdiagshop.com for VCI driver or check
here directly.
Free Download and Install VXDIAG Renault CLIP V237
Works fine with CLIP237 and is definitely not crap.
Works fine for
diagnostic functions and repairs.
Just learn how to do proper installations and work with software and hardware.
Pay attention to the driver installation. Install Renault driver separately. Don’t need to install Renault driver in vx manager.
VXDIAG VCX SE vs Scanmatik 2 Pro for Xentry Passthru
VXDIAG VCX SE and Scanmatik 2 Pro which is a better J2534 Passthru device for Xentry Passthru software?
Here is the clue.
Scanmatik 2 Pro (SM2 pro) J2534 is great solution for small car repair shops or car repair shops where Mercedes is a frequent but not core brand. With these devices, you can use DAS/Xentry/Vediamo 4/Monaco almost to the fullest. But passenger cars older than 2005 – most likely, not all units will be seen or the car will not be detected at all. Trucks that open via DAS will be ignored right away. But, for example, Xentry Cars 2024.09, Xentry Trucks 23.12 and newer do not officially recognize SD Connect C4 and work fine via Passthru.
VXDIAG VCX SE Benz is the most universal device at the moment, with support for DoIP and fresh versions of Xentry. It can be used with both Xentry Openshell and Passthru version. with Xentry 2023.12 XDOS and it takes everything it needs. In PassThru mode, it works better than Chinese clone of Scanmatic.
On diagnostics of MB w167 2021 year Xentry PT 2023.12 + SM2 did not work. Xentry XDOS 2023.12 + VXDIAG worked.
It gave Login fail on Xentry Cars 2023.12 Passthru and at the same time were perfectly diagnosed through the same Xentry Cars 2023.12 XDOS with exactly the same set of certificates.
So it is necessary to use both Xentry XDOS and Passthru version. If Passthru fails, use XDOS. In this case, vxdiag vcx se is a better option.