VXDIAG Subaru diagnostic scanner contains SSM3, SSM4 as well as FlashWrite2 programs. Here we list some information of the FlasjWrite2.
What is FlashWrite?
FlashWrite is the Subarus reflash software. It is the program for the dealer level programming of all car brand Subaru.
You can reflash everything from ECU, TCU, EPB, BIU, Eyesight, Rear View Camera, etc depending on model year and car and what updates are actually available for it.
Current version in vxdiag: V1.3.4
Check FlashWrite2 v1.3.4 download and install on previous post:
Download and Install 2020.07 VXDIAG Subaru SSM3 SSM4
Run SearchFlashWrite2 on desktop
FlashWrite menu
FlashWrite optional language: English, German, French, Spanish, Italian, Chinese, Japanese, Russian
Accessible systems: Auto Start Stop system, ECM, EPB, EyeSight, HCU, Keyless Entry CM, TCM
Supports Subaru model year till 2018
Flashwrite is compatible with multiple J2534 adapters, including vxdiag subaru.
https://www.vxdiagshop.com/service/vxdiag-subaru-flashwrite2-review.htmlAllscanner VXDIAG VCX scanners connection methods are listed below:
Both VCX DoIP and VCX SE supports LAN, WLAN and USB LAN Connection.
VCX Pro and VCX NANO (USB) supports USB connection.
VCX NANO WiFi supports both USB and WiFi connection.
Check guide below to connect your vxdiag diagnostic tools.
Connection:
Applied to: VCX-DOIP / VCX-SE
VCX-DoIP LAN Connection Diagram
VCX-SE LAN Connection Diagram
via USB Type-C to RJ45 LAN converter
Applied to: VCX-DOIP / VCX-SE
VCX-DOIP WLAN Connection Diagram
VCX SE WLAN Connection Diagram
WLAN Connection Procedure:
Connect VCX with vehicle, make sure enough power supply is feed to vehicle to start engine
Search WLAN on your laptop: DoIP-VCI-XXXX,Select Auto Connection and press Connect
Enter WLAN password: 12345678, Press Next.
Check WLAN information after well connected.
Applied to VCX-DOIP / VCX-SE
VCX-DoIP USBLAN Connection Diagram
VCX-SE USBLAN Connection Diagram
First Time Connection:
Windows will auto install device driver during the first time USBLAN installation
You will see Realtek USB FE Family Controller in Device Manager if the device driver install successfully
Applied to VCX NANO series only
USB VCX-NANO Connection Diagram
First time installation:
Windows will auto install device driver when connecting via USB for the first time
You will see USB Serial Port (COMx) in Device Manager if the device driver install successfully
Applied to VCX NANO series only
WiFi VCX-NANO Connection Diagram
WiFi Connection:
Start device normally
Search wifi: VCX-WiFi,press Connect
Connect success (Don’t need password)
Run VX Manager, The information of device will be displayed in “Device Manager”.
Select [Device], then click [Configure], Connection Type select [Auto], click [Save], Restart VX Manager program
https://www.vxdiagshop.com/service/vxdiag-vcx-lan-wlan-usb-lan-connection.html
Question: Please help I need install all programs for vxdiag GM?
Image source: https://www.vxdiagshop.com/info/download/
Vxdiagshop.com engineer replied:
No, only need gds2 2020.04, gds2 patch and tech2win 16.02.24
1). VXDIAG GM GDS2 Software 2020.04:
https://mega.nz/#F!jN4lSYaA!5Q_p4sZEySxLu6HVPP418A
2). gds2 patch:
https://mega.nz/file/oZ820RCJ#BXRW3mOGCC7mfMjtaJ71AzjwghBlCogoM7RNGWi9KmE
3) tech2win 16.02.24
https://mega.nz/file/tIFWUIxT#XBAFZWEFPhQ3A9MtyPYfT1wojVgB1sEmt2T62nrmQcM
Or download this one link directly, it is working:
https://mega.nz/file/0oZGXJaC#6mKkEWDB0Z6lz7wulFjzmb4bpyoK1KWDkQIzdQW8HFQ
Instructions for installation:
Please follow this link to operate in step by step.
https://www.vxdiagshop.com/upload/pro/21031116155159427787.pdf
Operation System:
Need to use WIN10 PRO
home version is not compatible
vxdiag GM with GDS2 Tech2win software are referred to:
Hope it helps!
Wondering if VXDIAG Benz C6 DoIP Allscaner is good and work ok for Mercedes Trucks and Buses at 24v with XENTRY XDOS 2019 or 2020? Someone already tested it and would like to share with you their experience.
Here we go for review:
For me was and it is ok, I was able to change HP on mp4 Actros 2012 and work with SCR, I did some comfort coding,
I didn’t work with another Mercedes car, only to truck also euro6!
This its the picture with connection with my truck its EEV and yes ,have 24 volts.
But if you buy must know you will have only 5 years support for firmware and drivers at least for openshell.
Vxdiagshop engineer official reply:
VXDIAG C6 work just on some 24v Mercedes Truck models not on all models this time (For example, C6 cannot work on AXOR with protocol Iso 9141-2.)
They work for 24v Mercedes Trucks fully 100% support in the future but not this time and now.
This time till date Mercedes 12v work perfectly.
Vxdiagshop here lists some significant differences between the vxdiag vcx se BMW and ICOM next (clone) multiplexer.
Differences:
Silimalries: