VXDIAG GDS2 Failed to Read 2019 Buick Encore VIN Solution

Problem:

This is a 2019 Buick Enclave, Chinese model. The VXDIAG VCX NANO GM GDS2 software is unable to automatically detect the vehicle’s VIN. Manual selection still fails to recognize the VIN.

Any solution?

Solution:

The antivirus software must be turned off, otherwise the cracked software and device drivers will be deleted.

Most newer GM models manufactured by SAIC GM Motors should use RDS3 diagnostic software, including the new GL8.
It is recommended to use the VXDIAG VCX SE along with a 2TB hard drive HDD.

The RDS software is included in the hard drive.

VXDIAG VCX SE JLR VCI Not Detected when Connect via LAN?

Problem:

Connected the VXDIAG VCX SE JLR scanner via LAN cable. The device was detected by vx manager. But when running Pathfinder software, it gets stuck on this page. It will not communicate with the VCI interface. Any idea?

 

Solution:

This error indicates that the required Bosch VCI driver is not installed.

Install Bosch VCI Driver Installer (Bosch VCI software JLR 2.4.22.59 driver) in JLR-TopixInstaller folder.

How to Install JLR SDD V168 for VXDIAG JLR?

Good news! Latest Jaguar Land rover JLR SDD diagnostic software 168 is out now. Same patch applies.

Our customers have successfully tested the new JLR SDD 168 software with our VXDIAG devices—it works perfectly with the same patch.

Compatible devices:

VXDIAG VCX NANO JLR USB/WiFi

VXDIAG VCX SE for JLR

VXDIAG VCX Multi Tool DoIP for JLR

Free download JLR SDD V168 software

Same patch with all versions.

Free download patch for JLR SDD V168

How to Install JLR SDD V168 Software?

 

 

1. Run VCredist all-in-one FIRST before anything.
2. Install base program JLR v168
3. Run OFFLINE1.exe
4. Run JLR SDD, then log in using username and password below.
5. Exit SDD.
6. Run OFFLINE2.exe
7. Restart PC – run SDD and use as normal. – you may have to go to Settings > Network > and enable network connection to get online downloads working.

Network icon may be red, but downloads should still be working. NOTE: Working now with Edge no issues.

 

How to Solve VXDIAG VX Manager Win10 Error Code 126?

Problem:

Unable to install VX Manager for VXDIAG VCX SE on Windows 10. The installation fails with Error Code 126 every time. Uninstalling and reinstalling doesn’t resolve the problem.

Any solutions?

Solution:

After a TeamViewer diagnostic, vxdiagshop.com engineer discovered that the issue was caused by the Windows 10 Home edition, which lacks the necessary permissions to run VX Manager. To resolve this, please use a laptop with Windows 10 Pro (Professional Edition) instead.

VXDIAG BMW ISTA 4.39 Cannot Connect with BMW X5 Solution

Problem:

Using VXDIAG VCX SE BMW scanner and ISTA+ 4.39 software to diagnose a BMW X5 2011. Sometimes it can establish communication, but other times it fails. It cannot read VIN. If you input VIN manually, it keeps ongoing the backgroud process. How to fix it?

Solution:

First of all, select vehicle interface (device type) as Dealer organisation ICOM/ENET local area network.

Allow Ethernet as the preferred communication channel when connected via ICOM.

If still cannot read VIN, disconnect the VCX SE for 2 minutes.

Then connect the device and test again.