Problem:
The vxdiag
vcx se Ford scanner has no communication with my Ford. When
start IDS V130 software, it says no active IDS software access rights were
found.
it is needed for vehicle connections.
Error:
“No active IDS software access rights were found on your
computer.
It is needed for vehicle connections.”
Any solution?
Solution:
MUST start IDS from patch.
Follow the correct procedure to install Ford IDS V130.
1.Install Ford IDS 130
2. Restart computer when Ford IDS installation is
completed
3. Install Ford VCI driver 1.0.0.10.exe
4. Install VX Manager
and Ford IDS driver
5.Connect VCX SE and Install IDSPatch
6. Run IDS from
Patch
How to add a Keyless Entry to Ford Bronco or other new models without any dicking around from the dealer.
Tools you need:
Keyless Entry Keypad KB3Z-14A626-A (FOR BRONCO WITHOUT REMOTE
START)
Keyless Entry Keypad KB3Z-14A626-B (FOR BRONCO WITH REMOTE START)
VXDIAG VCX NANO Ford J2534 adapter
https://www.vxdiagshop.com/wholesale/vxdiag-vcx-nano-for-ford-mazda-2-in-1.html
And the Ford FDRS
Software:
https://www.motorcraftservice.com/diagnostic/Support?channelId=51&categoryId=304
And it is super easy to do with FDRS Software from Ford's website. You need to get a 2 day license for the software ($50).
You will need the Keyless Entry Pad, internet access, the FDRS license, a Ford login account, and Internet access in order to install the Keyless Entry. NOTE: When you buy the license it doesn't make your account. So that was an extra step. (I actually installed all the FDRS,FJDS, IDS, and VCI software)
I installed the license in FJDS only to find out that FJDS doesn't work on the Bronco.
After intalling the FDRS software, the VXDiag VX Manager Software, and the
J2534 Adapter;
Start the FDRS software.
Open FDRS, log into your account
using FDRS
Look for the Keyless Entry Programming section and download that
routine from the net.
Make sure the vehicle is off, and start the module,
follow the instructions.
Power on vehicle when prompted.
Enter the six
digit serial number when prompted.
Test the Keyless Entry Lock when
prompted.
Turn off the vehicle when prompted.
Test the entry
code.
Program your new personal code if desired.
Test your personal entry
code
press 7-8/9-0 to lock your vehicle.
You are done.
It was really quite easy! Hope that helps anyone who wants to tackle this.
Ford IDS V130 was tested and verified working fine with vxdiag scanners including VXDIAG VCX NANO Ford/Mazda USB or WiFi, VCX SE or VCX Plus Ford/Mazda.
Here is the guide to install vxdiag Ford IDS V130 software on Windows 10.
Software can be downloaded free here
Operating system: Windows 10 (free to test on Win7 and Win11)
NOTE: Don't install both Ford IDS and Mazda IDS on the same operating system!!!
Procedure:
Open Ford IDS V130 software folder
Install IDS_130.01_full.exe setup
Select setup language
Install setup until completed
Reboot
Install VCI_Software_1.0.0.10 driver
Install VX Manager 1.8.9
Install Passthru and Ford/Mazda IDS driver
Copy and paste IDS_Patch to desktop
Connect VXDIAG device with
laptop
Run VX Manager
check device status
Run Ford IDS from IDS_Patch on desktop
Software is ready to use
https://www.vxdiagshop.com/service/install-vxdiag-ford-ids-v130-on-win10.html
Latest version Ford IDS V130 and Mazda IDS V131 were tested working fine with VXDIAG scanners.
Software version:
Ford IDS V130
Mazda IDS V131
Operating system:
Windows 7/Windows 8/Windows 10
Multi-language
Compatible devices:
VXDIAG
VCX NANO Ford/Mazda USB or WiFi,
VCX
SE or VCX
Plus Ford/Mazda
Password: qq8s
Password: a7gu
Password: k55y
How to Install VXDIAG Ford & Mazda IDS?
Ford IDS Installation:
1. Install Ford IDS-1**
2. Wait for the installation of Ford IDS – 1**,
and restart the computer
3. Install the Ford original VCI software_
1.0.0.10.exe
4. Install VX manager and IDS driver on VX manager "Diagnostic"
Menu
5. Wait for VX manager and IDS driver installation to complete
6.
Connect VCX device and install idspatch
7. Use idspatch to open IDs and start
diagnosis.
Mazda IDS Installation:
1. Install mazdaids-1**
2. Wait for mazdaids – 1** installation to
complete and restart the computer
3. Install VX manager and IDS driver on VX
manager "Diagnostic" Menu
4. Wait for VX manager and IDS driver installation
to complete
5. Connect VCX device and install idspatch
6. Use idspatch to
open IDs and start diagnosis.
Problem:
I had a problem running vxdiag vcx nano Ford IDS V129 software. It gives an error "Cannot Proceed until application has finished". Any idea?
Solution:
Must start IDS from patch.
Download IDS patch here.