VXDIAG 2TB HDD JLR DoIP Error Solutions

Vxdiagshop here collects common problems and solutions of the 2TB SDD/Pathfinder HDD software for vxdiag vcx se full.

Problem 1:

JLR DoIP pathfinder does not communicate with vehicle, software runs ok, the vehicle is connected, but Pathfinder has no VCI communication.

Solution:

Missing JLR VCI driver.

Download and Install JLR VCI software driver here

https://mega.nz/file/oZFxTITI#hhOvdJM03hsN_q2VLMdbfdYEawLRxPjqf85jpJAlW14

Problem 2:

My vxdiag vcx se Pathfinder software displays in Chinese. How can i change it to English?

Solution:

Go to the Setting option, then change language to English.

After reset language, exit and run software again.

Problem 3:

I started the 2TB JLR SDD software, after login with user name and password, it says network connection not detected.

Solution:

Download and install JLR SDD offline patch here.

Then run SDD again.

https://mega.nz/file/icIkTKCA#8NO-AP3eM9k2kEd62OlCNfYeSD1BxT9r1SEnObZIBsk

Problem 4:

I got the JLR DoIP driver installed and the correct VCI selected, but Pathfinder will not communicate with my vehicle. It says the vehicle is not supported after manual input VIN.

Any solution?

Solution:

Vehicle is not connected. Once vehicle is connected, JLR pathfinder will communicate with vehicle.

VXDIAG VCX SE Volvo S60 No Cummunication Solution

Problem:

I got the vxdiag vcx se pro with 3 brands including VIDA 2014D. I got it connected and but VIDA software has no communication with the vehicle, It cannot detect vehicle information. Any solution?

Solution:

You have wrong VCI type selected.

Select communicate interface as VXDIAG- J2534 rather than DICE -J2534.

If choose the correct interface, VIDA will detect vehicle information and communicate without issue.

VXDIAG VCX SE Subaru Forester 2016 Review

Here's new Subaru scanner feedback and review from one of our customers.

I have a working bi-directional scan/diagnostic tool. The device is a VXDIAG VCX SE model, made by Allscanner, a Chinese company and it was purchased from vxdiagshop.com. I chose a Toyota and Honda "license" for it as well. Total including shipping from China, was just under $250. The Autel I looked at had very limited bi-directional support for Subaru; mostly "read-only". So i decided to get this vxdiag.

It works on Subaru with a copy of SSM3/SSM4. The SSM "Patch" provided doesn't appear to work with Win10; I'll try win7 later. I like Win7 way better than Win10 in any event.

The SSM4 will connect to my 2016 Forester, and it is bi-directional; the only thing I have done so far is activate the horn, and work the door locks, but for that to happen, it has to be talking to the cars CANBUS, and working is working. SSM4 is not at all intuitive to use, and there doesn't appear to be anything like an instruction manual available for it, so be prepared for a steep learning curve.

I haven't tried the Techstream/Honda software with the VXDIAG device yet, but the TIS v.7 I have on another box works just fine, and it isn't real difficult to learn.

I was able to put Windows7 on the Win10 laptop. It wasn't trivial, but it did activate.
I was able to install the SSM3/SSM4/VXDIAG_Manager software, and the "Patch" works as advertised under Win7.
I was able to connect to the Forry, run assorted diagnostics, see "live" parametric data, etc. I found the instruction manuals for the SSM* software, and I guess I'll have to RTFM at some point.
All good, but randomly when trying to connect, the car CANBUS has a fit about something. The instrument panel lights up like a Christmas Tree, the VXDIAG refuses to connect, and after shutting down and disconnecting everything, the car has the CEL on when re-started. A generic OBDII scanner finds the following DTCs:
U0101, U0122, U0073, U0155.
All CANBUS "communication" errors. The scanner will clear these DTCs, but they are listed as "permanent", and they come right back. Driving the car a bit does clear them, and then the VXDIAG device will connect again. I pulled the car OBD connector loose, and gave it a good once-over; it looked fine.

$250 is a very nice price compared to sourcing an official tool from Subaru (~$3,000 for the Denso device, plus $1500/yr subscription for SSM software.

How to Fix VXDIAG VCX NANO Ford Not Found Device Error?

Problem:

I got the vxdiag vcx nano Ford and IDS v127. But software does not see VCM device. I tried to install Ford driver in vx manager, but it says "Not found device or license". Any solution?

Solution:

Driver problem.

Update firmware in vx manager.

Then re-install Ford IDS driver.

vcx nano ford is detected by IDS software.

Free Download Toyota Techstream 17.30.011 for VXDIAG

11/2022 newer Toyota TIS Techstream software was tested working fine with vxdiag vcx nano Toyota scanner.

Version 17.30.011 Software
Last Updated: 11/2022

OS: WinXP, Vista, Windows7, WIN8, WIN10

Free Download Teschtream 17.30.011 for VXDIAG VCX NANO Toyota

patch and driver are included.

https://mega.nz/file/xxU1ACTT#gEDHjgmnVvJ5FEm1m74sjdi7M6fN4V1Dc8AkwgbQzZ4

NOTE: The patch inside is for mini vci. For vxdiag users, install patch below.

Free download VXDIAG Techstream V17 patch

https://mega.nz/file/iBo1EC4B#Ai7R7BINqoMDWMmCCMGxpJbenCHNF7BsqIaLbsV3HaU

Password: NO PASS!!! With Patch does not require activation.

Software installation procedure is easy.

Install Techstream setup
Install VX Manager
Crack Techstream V17 with patch
Run software from patch