VXDIAG tutorial: how to install vxdiag vcx se 6154 odis 9.1.0 + Postsetup 90100.207.230 + vx manager + 6154 driver on windows 10 operating system.
9.1.0 software can be downloaded free here
http://blog.vxdiagshop.com/2022/04/22/free-download-odis-service-9-1-0-postsetup-for-vxdiag/
Operating system: Windows 10 32bit
Multi-language: English Japanese Portuguese Romanian Korean Dutch Polish Turkish Spanish French Italian Croatian Danish German Swedish Finnish Slovenian Czech Russian Greek Chinese
Procedure:
Step 1: Install ODIS Setup
Open ODIS 9.1.0 folder
Run OffboardDiagSetup_VWMCD_9_1_0
setup
Select setup language
Install ODIS setup assisant
Target paltofrm to Standard PC/notebook
Select dagnostoc interace as
VAS 6154
Add license.dat license from C:/Users/Administrator/Desktop/ODIS9.1.0/license.dat folder
Tick Create a folder in the start menu and create shortcuts for all
users
Installing setup until finished
Copy and paste OffboardDiagLauncher file from
ODIS91.0/Replace license/ODIS910 folder
and replace the file
in C:/Program Files/Offboard_Diagnostic_Information_System_Service
folder
Copy and paste plugins file in ODIS91.0/Replace
license/ODIS910/plugins
and replace the file
in
C:/Program
Files/Offboard_Diagnostic_Information_System_Service/pluginsfolder
Step 2: Install PostSetup
Run Offboard Diagnostic
program on desktop
Select local directory
Upload ODIS-Service_update_9_1_0
EU folder
Press Next
Select PostSetup language
Download files and restart computer now
Step 3: Install VX Manager and 6154 Driver
Download VX Manager driver 1.8.9 on vxdiagshop.com download area or
vxdiag.net
Install vx manager and select VAG ODIS 6154 program to install
connect vxdiag
vcx se 6154 interface with laptop via USB or WiFi (first installation
recommend connecting via USB)
check device status, if the firmware is not the
lateast version, click “Upgrade” to update to the latest version
Update
license.
Make sure ODIS 6154 driver is installed
Step 4: Run ODIS 9.1.0 Software
Open Offboard Diagnostic program on desktop
software is ready to use
Problem:
I was programming a Land rover Discovery 3 with vxdiag vcx se jlr SDD and noticed I was not reading any units that are on high speed can bus. Opened the vcx and found this U20 chip is broken.
No CAN BUS communication with this chip blown.
Solution:
You can search ebay for main board U20 EEPROM, then changed the interface.
It will all be ok.
Disclaimer: We are not responsible for the damage.
Problem:
Just got the VXDIAG VCX SE 6154 ODIS 9.1.0 downloaded but failed to change language. Error DS9006E MirrorServer2
Infrastructure. Online connection. MirrorServer2: Administration rights are required for the update. The installation language cannot be deselected.
.jpg)
Solution:
The ODIS 9.1.0 mega download link comes with Chinese language pack only. Users cannot change the language.
If need to change software to other language, choose 9.1.0 Engineering V14.0.0 Software HDD 500G
Available language: English Japanese Portuguese Romanian Korean Dutch Polish Turkish Spanish French Italian Croatian Danish German Swedish Finnish Slovenian Czech Russian Greek Chinese
Problem:
My vxdiag vcx se Benz wifi indicator does not turn on, it won’t pair with WiFi. No device was detected in the vx manager. I tried to reset firmware, no luck. I got a timout error.
Solution:
Check your WLAN IP.
If IP is correct (check image below), you don’t need a firmware reset.
Install latest vx manager 1.8.8, update firmware and license.
Try again.
Any questions feel free to contact www.vxdiagshop.com
Read also: How to reset VXDIAG VCX SE Firmware?
Problem:
I got the 2tb software HDD with vxdiag vcx se full. I failed to start INPA Ediabas software.
Error 1: API Initialization Error
Error 2: Error #159 timeout.
Any solution?
Solution:
Your vcx se device is not well connected.
Check How to set up INPA for vxdiag below: How to Set up INPA Software for VXDIAG VCX SE BMW?