How to Fix VXDIAG 2TB HDD GM License Invalid No Device?
Problem:
I have the vxdiag 2TB HDD gm license activated but vx manager cannot detect my device. It says the device license for this application is invalid when trying to install GDS2/Tech2Win driver.
Any idea how to fix it?
Solution:
Vxdiagshop.com technician help fix this issue via Teamviewer.
We found the NIC Network driver adapter is missing. Problem solved by installing NIC driver.
Now the vxdiag scanner is well connected.
“No Device” problem is usually caused by network driver. Always check NIC driver first.
How to Solve VXDIAG WIS EPC "Unknown LAN ID” ?
Here comes the solution to VXDIAG VCX SE Benz or Benz C6 DoIP WIS EPC software “Unknown LAN ID” problem.
I need to get WIS EPC activated. But when ready to paste the LAN ID to generate license key (Startkey), the page indicates “Unknown LAN ID” in the MAC address field, and apparently the EWA net server cannot match it with the license key.
Solution:
1.Check NIC Driver.
2. Open “Computer Management”
3. Right click “Device Manager” to select “Show hidden devices”
4. Delete All Tunnel Adapters “Microsoft ISATAP Adapters” (all virtual network card drivers with #) “Teredo Tunnering Pseudo-Interface”.
Or contact www.vxdiagshop.com technical support via Teamviewer.
Related video guide:
BMW VANOS Adaptation byVXDIAG VCX SE ISTA?
Today vxdiagshop.com will show you how you can make an adaptation with vxdiag vcx se BMW ISTA diagnostic tool.
It’s a mini cooper and we will show you how you can do it with this new adapter- vcx se.
You don’t start the engine, just turn on the ignition switch
Let’s communicate with the car. It is a Mini cooper 2006 R54 N12.
You should have a battery maintainer i do not have it. I have 12.4 volt for the moment.
it should be 12.5 12.8 when you do this.
it is not so bad i’m on what it’s up to 12 volt it is good
you can see the voltage over here terminal 1350.
We have the fault here on DME control unit, press DME and continue
as you can see we do have this error here
ISTA asks if you have enough battery voltage. yes i have the battery
and you should go here on repair
then you press the text
and you should write your adaptation
you will search and let’s see what you will find here
we go on the delete adaptation. Select DME Delete adaptations VANOS
we have here reset adaptation and we press continue
and we have here switch of the terminal 15.
Service function finished
we press continue
and after delete this adaptation
we go again on the search
Select VANOS adaptation, you press continue
switch off
we wait about 10 seconds
let’s start the engine and press continue
we should stop the engine
take care. switch on let’s switch on and we press ok
these are our adaptations
the values are very good
Press Yes because we do have these values and once it’s successfully adapted
and now the things is finished
okay you should press continue and everything is done
okay this was the way how you can delete VANOS adaptation in bmw or mini with vxdiag vcx se bmw ista.
http://blog.vxdiagshop.com/2021/11/08/mini-cooper-vanos-adaptation-with-vxdiag-vcx-se-bmw-ista/
What is the Best Cable for Toyota Techstream subscription?
Purpose: program a new credit card key for 18 Toyota LX, plan to sign up for a subscription on Toyota’s website and access to Techstream.
My question is: Any recommendations for a high quality cable to use with Techstream subscription?
Recommendation:
VXDIAG VCX NANO for TOYOTA TIS Techstream V16.20.023 works great as I and others have confirmed:
The cable I recommended above comes with a hacked copy of techstream. Programs keys, tpms, etc. no problem….
I run Techstream on a Microsoft Surface tablet and 64-bit Win 10 operating system.
And to be clear, the TIS referenced length of subscriptions is access to the online factory service manual. It does not come with Techstream or the OBDII to computer cable.
Question: What happens to Techstream Lite once the first year is up? Need to renew every year or do you ”own” it after the initial purchase?
It has to be renewed. That is the big advantage of the “alternate” method. They seem to have broken the time limit. The advantage of the “official” method is that it is supposed to run faster.
One more caveat not germane to 2021 or earlier Toyota/Lexus products. Toyota says that future models will not run using the existing computer cables – their product up until (?? Date), or the existing aftermarket versions. My sources imply the future version of Techstream cable connection (in the USA) is being outsourced exclusively through Snap-On Tools (Usually means $$$$). Probably something to do with the new EV models coming out.
Finally! Update
I ordered VXDIAG VCX NANO for TOYOTA TIS Techstream.
and it installed easily and connected to my 18 LX first try. Wanted to have a Windows laptop so got a NOS from a couple of years ago, the Surface Book 2.
It’s amazing what Techstream can do (duh uh – what took me so long?) and that’s after only scratching the surface as they say. Programming my credit card key was simple but getting to the correct screen was a chore for me, however. After watching some videos and giving up on trying to find “Immobilizer“ or “Smart Key”, I noticed the “Entry&Start” on the System Selection Menu so tried that. Yup, Key Registration shows up and it’s a breeze from there.
Enough for now but I’ll definitely be looking at more quite soon.
Good to know:
When I installed the software that came w the cx cable it had essentially unlimited days. I’d reach out to them, they may have a different solution.
Or install this and the patch:
https://mega.nz/#F!SAR3Qa7B!N61Ikd1HKEodTiwpODLXKQ
Source: https://www.vxdiagshop.com/info/download/
Try installing the patch with antivirus off. Then open the patch executable file also w antivirus off.
And be noted too: it is needed to run Toyota Launcher instead of simply starting Techstream. So….success!
VXDIAG VCI Update License Error Code 0
Here comes the working solution to vxidag multi vci (the big device) update license failure.
An error occurs when trying to update firmware and license. Error Update License Failed, Retry! Error Code:0″
Vxdiagshop.com solution:
First of all, check your VCI and DoIP firmware version.
We see the VCI still use old version VCI and DoIP firmware version 1.6. You have to update both versions to 1.8 (VCI 1.8.4.0 and DoIP 1.8.1).
Then update license.
If not working, change network connection or another WiFi hotspot.
Contact us if all the above failed.