How to Change SDMedia Language of VXDIAG Benz?

Here is a little write-up on how to change vxdiag benz SDMedia 2014 software language.

Mercedes Benz SDmedia is a multimedia guide that contains information about the repair and maintenance of vehicles of the firm, with visual clips that facilitate the process of solving problems, and is in addition to the program Mercedes-Benz DAS/Xentry.

RunToolfolder on the desktop

In the Tool folder, you'll find various index.html files which determine the display language.
index_CN.html = Chinese
index_DE.html = German
index_EN.html = English
index_ES.html = Spanish
index_FR.html = French
index_IT.html = Italian
index_JP.html = Japanese

Make a double-click on your language according file to start SDMedia 01.2014.

SDMedia multi-language: Chinese, German, English, Spanish, French, Italian, Japanese

https://www.vxdiagshop.com/service/change-vxdiag-benz-sdmedia-2014-language.html

Mercedes W205 Start/Stop Coding with VXDIAG DTS Monaco

Mercedes Benz W205 Start/Stop coding tutorial using vxdiag vcx se benz or benz c6 doip with DTS Monaco 8.14.

Requirement:

VXDIAG uses DTS 8.13 and here we use DTS Monaco 8.14.

You should download SMR-D files for connection and SeedCalculator. Download free here.

Everything you do is at your own risk. We are not responsible for the damage. 

Disable Start/Stop in W205 with DTS Monaco 

1. Turn on the ignition. Launching DTS Monaco

select Temporary workspace

2. Select the SMR-D file from the list, depending on which module you want to connect to. in our case, MED40.

3. Remove the module from the control unit. In the Diagnostic service tab, we find the Security Access line, find the Request seed key line in the list, click on the Transmit button. We get the key, which we enter in SeedCalc.

See the same code below. We copy it.

4. Run SeedCalc. At the top, select MED40CNG_med40_sec_new_00_00_00.

In the screenshot SeedCalc 2.3, but I give a link to the 3rd version. Works identically and the logic is the same.

5. In the "SEED" field, enter the values ​​obtained from the Request seed key at the previous stage. Click "Generate". Copy the first 8 characters (all except 00 00 00 00).

6. Go to DTS Monaco. Select the line Send Key Variantcoding. On the right, in the "Send key" field (highlighted in green), paste the data received from SeedCalc.

6.1. Click on the Transmit button. If the code is correct, then below it will be " acknowledged ".

IMPORTANT! If, when sending a seed code, the Response State is marked in red and written not acknowledged, then you need to select another module option in SeedCalc and calculate the code again. The unlock code changes after each entry. Those. if the unlock code did not fit, then you need to select Request seed key again and insert new values ​​into SeedCalc.

7. If everything is successful at this stage, then go to the "Variant coding" tab. In the ECU selection menu, find MED40 and click "Connect". Scroll down, find the desired line and change to "Last mode". Then click on Do Coding! In this way, you can change the speed limiter and in general everything that is in the MED40.

8. After you have done the encoding, you need to return to the Diagnostic service, select Hard reset and click Transmit.

Now start / stop remembers the last position and does not turn on automatically when switching between sport-eco-comfort modes and does not turn on when starting the car. Those. the start-stop system is in the state it was in before the engine was turned off.

The same logic encodes all other units that support variant encoding.

http://blog.vxdiagshop.com/2022/05/31/vxdiag-vcx-se-with-dts-monaco-doip-configuration/

2022.06 VXDIAG Xentry "No Access Authorization Code" Solution

Here comes the working solution to 06/2022 VXDIAG Benz C6 / VCX SE Benz Xentry 'No Access Authorization Code' problem.

OpenToolfolder on desktop

RunConfigAssitprogram

Select device type:Xentry Diagnosis VCI

Exit ConfigAssist
Run 2022-06 XENTRY (Diagnosis) on desktop

Software is ready to use

If not working restart computer and run Xentry again.

Technical support from www.vxdiagshop.com

VXDIAG VCX SE Request Timeout When Reset Firmware?

Problem:

My vxdiag vcx se Benz wifi indicator does not turn on, it won’t pair with WiFi. No device was detected in the vx manager. I tried to reset firmware, no luck. I got a timout error.

Solution:

Check your WLAN IP.

If IP is correct (check image below), you don’t need a firmware reset.

Install latest vx manager 1.8.8, update firmware and license.

Try again.

Any questions feel free to contact www.vxdiagshop.com

Read also: How to reset VXDIAG VCX SE Firmware?

VXDIAG Benz WIS_EPC Not Working Solution

One of our customers failed to open VXDIAG Benz WIS/EPC and StarFinder software. Our customer helped him out via Teamviewer. Hope it helps if you have the same problem.

Don't change your computer's default browser. In this case, he has changed the default browser from Edge to Firefox.

Follow the steps below to run WIS EPC on firefox. Same procedure with other browsers.

Right-click WIS_EPC desktop shortcut on the desktop
Go to Properties
Copy and Paste the URL

Open WIS_EPC

Paste URL here

Login with User name (admin) and password (12345)

Read also:

How to activate VXDIAG Benz WIS EPC software?