Problem:
I tried setting up the VXDIAG
VCX SE with Volvo VIDA 2014D software on Windows 10. After
running VIDA from the patch, I was unable to log in. I reinstalled the software,
but the issue persisted. Any ideas on how to resolve this?
Solution:
After a TeamViewer session with an engineer from Vxdiagshop.com, it was discovered that the wrong patch was being used.
Steps to Fix:
Problem:
Tried to use VXDIAG VCX SE 6154 scanner with the new ODIS service software version 24.3.2. VX Manager detected the interface but no VCI selection in ODIS software.
Does vxdiag work with odis 24.3.2?
Solution:
The vxdiag vcx se is compatible with 24.3.2 service software.
1. Update VW driver. Uninstall VW ODIS 6154 and reinstall driver in vx manager.
2. Install ODIS PDU driver.
The original 6154 driver is lost or hacked by virus.
Contact www.vxdiagshop.com to download original ODIS-S PDU driver (VW D-PDU API 64bit).
Double-click to install the VW D-PDU API 64bit driver setup. Choose the destination location as C:/Program Files/VW_PDUAPI_OS folder and wait until the setup installation is finished.
It should be fine. Run ODIS-S software again. Select VCI type as VAS 6154.
Problem:
Tried to use VXDIAG VCX SE GM with GM Techline Connect SPS2 for ECM programming. TLC reported an error “UEH101:null”. Anyone gotten this error before?
Solution 1:
Delete it and reinstall happened to some others.
If hit uninstall then redownloaded. Same problem. You have to uninstall everything that involved it’s. There’s like 15-20 different things that tie in to it. Have to go to add remove programs and remove it all.
Solution 2:
Had this happen not too long ago called tech support and 3 hours later they said it was my computer. New laptop. I was using google chrome to sign in to tds, but when I switched to Microsoft edge I worked and went through and working ever since. Hope you get it resolved!
Problem:
I use VXDIAG VCX SE and CLIP.
My CLIP v237 keeps giving errors. Error “Vehicle not diagnosed by CLIP. please switch to ADT”
What is ADT and how to solve it?
Solution:
If you are using CLIP software, you will receive an error message: “The
vehicle is not subject to diagnosis with the CLIP device, please switch to the
ADT device.”
Renault Group has launched the Alliance Diagnosis Tool (ADT)
across its dealer network worldwide. ADT is the next generation of diagnostic
and repair tool for vehicles manufactured after 2020.
VXDIAG
VCX NANO Renault does not work via DOIP and cannot be used as a
transit communication channel with the ADT, the Renault
program.
VXDIAG VCX SE works via DOIP, but some users tested
it and found that they could not use physical token for ADT.
Therefore, for new Renault cars with the SGW security gateway, it is better to use the original RNM VCI or Autel/Launch X431 scanners (you will still have to bypass the gateway).
Use the Gateway OBD 16+32 adapter. The SGW is under the gear knob, behind the plastic cover.
Problem:
After using the VXDIAG VCX SE BENZ diagnostic tool approximately three times, it prompts that the VCI license has expired and 09/2024 Xentry cannot be launched. I tried using the ‘VCI Recovery’ tool on the desktop to update, but it still doesn’t work. Try to update license in vx manager, it said update license failed, error 4001.
Solution:
The VX Manager network shows “offline” which means the computer is not connected to the internet.
You must have network connection to update license.
Update license and try again.