How to use VXDIAG VCX SE Benz with Xentry Passthru?

The new vxdiag vcx se for Benz device is designed to diagnose and program Mercedes benz cars. You can also use BMW and a lot of all sorts of programs that it supports.  Here we show how it works in VCI mode, like VXDIAG Benz C6.

The device is good workmanship, good usb cable and plastic case. 

The software supports Mercedes 20105 up, it does not support older models. This is the drawback. But everthything seems to be set up now.

We are testing this device.  We will show the installation and configuration of Passthru also OpenShell XDOS.

Vxdiagshop provides HDD or SSD Openshell version. You can make it work with Passthru if you wish.

We will also demonstrate its operation.

The vcx se Benz device also has the ability to support DOIP for updating commands and newer cars.

First of all, we need to download vx manager driver on VXdiagshop.com

They have latest version vxdiag related driver and software available.

The device has the ability to work via wifi and also through USB cable.

We start install vx manager driver 

Install Passthru J2534 and BENZ XENTRY program

Other license are listed here. You need to buy a license for them separately.

Finish install VX Manager

The device is now connected via a USB cable.

Check device information, serial number

Go to Diagnostic tab

Choose Passthru, run an update 

Driver is being installed, updated.

Update C6 driver as well

Complete installation, we see the voltage, which is shown below and the internet is also connected to it.

In this case ,vcx se will not connect in VCI mode, because we first test the Passthru program, not OpenShell.

Connect vcx se Benz with vehicle (ML-164) via OBD socket

We connect without cable via wifi

Connect via a WIFI connection, in fact a vey convenient device, with higher capabilities, works more fully with Passthru than Openshell.

Open vx manager, we see that we have WIFI connection, see the tabs in which you can reboot it, connect DoIP, update the firmware.

We launch xnery and select VXDIAG using the passthru j2534 protocol.

All the rest work is the same as through Openshell, you must use the ‘ignition enable’ file which replaced the ignition emulator, connect to our car, we see that we have ignition file.

We run a short test.

It works quite quickly, it main advantage is that you can remotely connect to this device through the cloud (DONET remote diagnosis), even while at home.

All modules are read correctly, and old car is in DAS to check how it works.

We see that we forgot to start the ignition file, the ignition emulator, now we have it active. 

The program correctly see the ignition lock. 

For the price and function, it is worth buying.

https://www.vxdiagshop.com/service/vxdiag-vcx-se-benz-doip-unboxing-and-review.html 

How to Install Opel Vauxhall 2021 into VXDIAG GDS2?

Question: have VXDIAG VCX NANO for Opel, how to install new OV Opel/Vauxhall 2021 deliverable into GDS2?

I need this for insignia MY21 and this is still on GM platform, besides…Opel 2021 package is available as you can see in the screenshot, just need newest gds2.exe…. Model is available, but i can’t install package 2021.3 or 2021.2 or 2021.1.

Answer:

Opel/vauchall from 2021 will need Diagbox due to the PSA platforms being used.

In the GDS2 of Opel, you need to check if there is such a model, but there may not be. If it is GM 2021, there will be no problem.

This is the newest GDS2 software installation package available from vxdiagshop.com:

https://mega.nz/folder/jN4lSYaA#5Q_p4sZEySxLu6HVPP418A

Including: GDS2Install, GDS2 Install Guide, GDS2AutoInstall.exe, vcredist.exe etc.

vxdiagshop.com may not be able to update as fast as the ones in the market, but we will update as soon as possible.

VXDIAG Failed to Update Firmware After Retry

Problem:

My vxdiag vcx nano gm asks to renew license. so I follow this guide to install latest vx manager, update firmware and license.

It won’t let me update vci firmware and reported another error “Updated license failed! Retry. ErrorCode:8001” (image2)

VXdiagshop.com solution:

Force VCI firmware upgrade status to ON. If it is DoIP device, force both VCI and DoIP status to ON.

Then update firmware and license again.

If still not working, contact our customer service for help.