VXDIAG BMW ISTA-P Screen Resolution Insufficient Solution
Problem:
Failed to start BMW ISTA-P from 2TB HDD of the VXDIAG VCX SE full device.
It said screen resolution is insufficient to run the application. Any solution?
Solution:
ISTA-P resolution is too low.
The resolution of the ISTA-P software does not match the resolution of your laptop.
Follow the reset resolution in ISTA-P.
Run ISTA-P software, press “i” icon
Select Reset Settings
Press Yes to reset the Config settings.
Run ISTA-P software again.
Choose Automatic Search
Set the resolution as the same as your laptop/computer.
VXDIAG FDRS Program Ford Maverick Wireless Keypad
How-to: program a Wireless Keypad on a Ford Maverick MY 2024 using vxdiag vcx nano Ford scanner and FDRS software.
If you add the wireless battery powered keypad you must use FDRS (or go to the dealer)!
Buy a two day subscription for $50 on motorcraftservice.com. You MUST use a different OBD reader than the ELM327 adapter for FORScan! The cheapest options are a used Ford VCM II for about $150 or the VXDIAG VCX NANO for FORD for $89 on vxdiagshop.com. You may need to download specific drivers for the J2534 OBD adapter you are using. There are not many options for OBD adapters and most of the options are very expensive...thousands of dollars.
FDRS will be useful in the future for anything key programming related and for the other things FORScan cannot accomplish. Many people were not able to get Ford Dealerships to honor that cheap of an install. Ford Accessories Install prices are very misleading.. Several dealerships wanted over $100 for just the install. Many shops are using the exact same software and they pay thousands for the OBD adapter and subscriptions.
The driver for FDRS is in the download for the VX manager. If you try to
download the VX manager beta and it would not let you because antivirus was
kicking in but it let you install the latest release non beta. It's working fine
if follow these instructions below.
VXdiag instructions
FDRS is somewhat challenging to get set up. The servers can be iffy at first, you must have internet access and you must log into an active Ford account as an independent user. Here is a link below to help with getting FDRS set up.
After getting FDRS setup and connected to your vehicle, you now can set up your wireless keypad. You will start by choosing Toolbox. Then BCM. Then choose Remote Keyless Entry Pad. Now just follow the instructions until they are complete.
VXDIAG VCX SE with 11 Brands or VCX SE 14 Brands
Many our customer say we have VXDIAG VCX SE packages with 11 brands and 14 brands, how to choose among these brands?
VXDIAG VCX SE with 11 brands:
11 Brands including Benz, BMW, VAG, JLR (SDD), GM, Ford/Mazda, Honda, Porsche (piwis2), Toyota, Subaru, Volvo.
VCX SE 11 Brands (license only, no software): $469
VCX SE 11 brands with 2TB software HDD: $549
VCX SE 11 brands with 2TB HDD & Lenovo T440P laptop: $859
VCX SE 11 brands with 2TB SSD & Lenovo T440P laptop: $959
Nissan, PSA and Renault license are not included in the 11 brands.
So we released a new package series which contains 14 brands, including.
Benz, BMW, VAG, JLR (SDD), GM, Ford/Mazda, Honda, Toyota, Subaru, Volvo, Porsche (piwis2), Nissan, PSA, Renault
It is recommended to get the package with 14 brands, much cheaper than purchase extra 3 license separately.
VXDIAG VCX SE 14 brands (license only, no software): $649
VXDIAG VCX SE 14 brands with license & 2TB software SSD: $809
VXDIAG VCX SE 14 brands with license, 2TB HDD & Lenovo T440P Laptop ready to use: $999
If you don’t need all these brands, check vcx se with specific software license or vcx se pro with 3 brands (allows customize more brands)
NOTE:
Either 11 brands or 14 brands does not contain JLR DOIP License and PW3 License for new DOIP Car models after 2017. JLR pathfinder and piwis 3 license need to purchase separately.
Pathfinder, PIWIS3, BMW and Benz software update by HDD/SSD.
Other software update by link. Keep an eye on our website “Download” area or our blog when new software version available.
VXDIAG Porsche VCI Driver PT3G Not Installed Solution
Problem:
One of our customers set up OEM Porsche piwis iii software (not our HDD/SSD) with the VXDIAG VCX SE device. After install Porsche PT3G VCI driver in manager, the vcx se device cannot detect software, vx manager reported an error “PT3G not installed”.
Here is the clue.
If use OEM or 3rd party Porsche piwis3 software, you also need to install original PT3G VCI driver.
We don’t provide OEM driver. Need to find driver by yourself.
Or use our software SSD.
www.vxdiagshop.com
VXDIAG Update Benz C6 Driver 2024.06 Xentry
VXDIAG VCX DoIP and VCX SE Benz update Benz C6 driver to support 2024.06 Xentry software.
03/06/2024
Update:
Supports Xentry
Diagnosis 06/2024
How to Update:
1. First update VCI firmware to new
version V1.9.5.0
VCI Firmware V1.9.5.0
Update for Benz Xentry Diagnosis 2024.06
2. Update Benz C6 driver to 3.2.6.240522 in VX Manager
*06/2024 Xentry software will be available on www.vxdiagshop.com soon.