Fix VXDIAG VCX SE JLR DoIP VCI Not Detected
Problem:
I got the vxdiag vcx se JLR DoIP. I cannot select vxdiag interface. Error VCI not detected. Any solution?
Solution:
Install JLR DoIP driver in vx manager. It should be fine.
If you copied the HDD content and had this error VCI not detected, then follow the solution here.
VXDIAG JLR Pathfinder V374 VCI Connection Not Detected Solution
How to Solve DTS Monaco NRC=22 Error?
Car: Sprinter 2020 USA
Hardware: vxdiag vcx se benz+ xentry passthru+ DTS Monaco.
Problem:
I have NRC=22 error when doing FCW177 coding after Xentry erase all my
radar.
I don't have problem coding this module before erase – now module have
VIN and all data FF.
I am used: Security Acces Level 37 on FCW177 (without 37
level I have NRC=33)
Any idea for a fix?
Solution:
1. Make sure you take down the diagnostic firewall on EZS167. I think that is
Security Access 3B. Some projects, like BR177 have the link to the function as a
button to the left.
If you are working from a temporary workspace, then you
need to load both modules and go through EZS first.
2. Make sure you set your session as "Extended Start" in FCW177. I suspect your problem is actually this one, as the error says 'Write conditions not correct", not security access denied.
3. put the car in starting position 2, error 22 is due to that
Feedback:
It was necessary to make this command in the DTS Monaco and after everything was flashed, now after calibration my cruise started working again.
How to Solve VXDIAG Honda HDS Missing File?
Problem 1:
In VXDIAG Honda scanner I have a problem that in the download some of the files are blocked for suspicious virus, it's on the iHDS, in the part of prerequisites, starts with 57b, that file I have to locate it manually from Microsoft to complete the folder.
The file name it's Windows installer KB893803-V2-x86.exe.
Solution:
If missing this file, you can download Windows installer patch here separately.
http://www.mdsplus.org/dist/Windows/stable/x86/6.1.35/windowsinstaller3_1/
Problem 2:
I am now having a problem with Honda iHDS software. The immobilizer setup seems to be missing from the download. If I click on the immobilizer icon in the iHDS software, I get an error message that it can't locate a missing file. The instructions show to run the immobilizer setup tool, but that file was not in the download link provided. Is it located elsewhere?
Solution:
Here you can download iHDS software specialty