VXDIAG JLR SDD V160 Error SDK Solution

Problem:

I got the vxdiag JLR SDD v160 software installed, vx manager detects the device but when run IDS it displayed the error SDK GetProAddress. Any clue?

Solution:

Uninstall old vx manager and install new version vx manager from www.vxdiag.net.

Feedback:

It works. Now SDD is running.

VXDIAG VCX SE BMW EasyConnect Network Timeout Solution

Problem:

I got the vxdiag vcx se BMW and tried to follow your guide to configure EasyConnect tool to use INPA software.

vx manager detected the device, but EasyConnect Utility tool did not see the device and showed an error network request timed out, Log file written.

Any solution?

Solution:

Check device IP address.

The correct IP address should be 192.168.171.1 or 192.168.8.1.

Follow guide here to check device IP.

https://www.vxdiagshop.com/service/check-vxdiag-device-ip-address.html

If IP is incorrect, do a firmware reset.

VXDIAG Benz Xentry Error Code 126 Solution

Problem:

I failed to run vxdiag vcx se benz xentry software, error 126 has occurred.

"ERROR: LoadlibraryEz (VCX.dll) ErrorCode=126"

Solution:

Uninstall vx manager.

Download and install new vx manager on www.vxdiag.net (always keep vx manager up to date).

Feedback:

Now is working. Windows did some updates yesterday and i think that the antivirus erased some files.

How to Check VXDIAG Device IP when No Device Found?

VXDIAG diagnostic tool common "No device" error is usually caused by an incorrect device IP address.

How to check if VXDIAG scanners device IP is correct?

Take Windows 10 system as an example

Open Network & Internet settings-> Change Adapter options

Check Ethernet (Realtek USB FE Family Controller) network Status->Details

Check IPv4 DHCP and DNS server IP address

The correct IP address should be 192.168.171.1 or 192.168.8.1.

If IP is incorrect, reset firmware is required. Check the instructions here:

http://blog.vxdiagshop.com/2022/05/10/vxdiag-no-device-detected-with-vx-manager-1-8-6-onwards/

VXDIAG GM GDS2 "No TIS Connection" Solution

Problem:

I got the vxdiag vcx nano gm gds2 and driver installed. But when run GDS2, it says 'No TIS Connection Available'. Any solution?

Solution:

This error was caused by missing patch.

Download and run GDS2 from patch here

disk.yandex.com/d/dTT8d9YvQuejdQ

DO USE OUR SOFTWARE PROGRAM.

Check: Easiest Way to Install both VXDIAG GM GDS2 & Tech2Win