VXDIAG VCX SE Tested Working on Benz W211 2002
VXDIAG VCX SE Benz scanner latest review from one of the Russian users:
“I bought myself a VXDIAG VCX SE in order to save on diagnostics in the future. They says it is not good for old K-line models pre-2005. Although I doubted it would work completely with the old w211. Especially regarding the SBC unit.
Installed Xentry XDOS 24.09 and a short test found out that it sees all the blocks except ESP. Now I just have to sort out the errors)
After the test the unit’s number appears and you can enter it. But the ESP unit does not see.
It
read the SBC unit and found a fault code.
Update:
Disabling this option in the dashboard helped, and the error on
the speedtronic disappeared at the same time.
SBC -> Developer Data -> Activations -> Full list of all activations. And in the list that opens there will be a bunch of values, among them the necessary ones.
VXDIAG VCX SE 6154 ODIS V23 No VCI Selection Solution
Problem:
Got the ODIS-S 23.0.1 software installed and activated on Win10 laptop. VX Manager detected the VXDIAG VCX SE 6154 interface but no VCI (no VAS 6154 and others) selection in ODIS-Seriver software. Any solution?
Solution:
The original 6154 driver is lost or hacked by virus.
Contact www.vxdiagshop.com to download original ODIS-S PDU driver (VW D-PDU API 64bit).
Double-click to install the VW D-PDU API 64bit driver setup. Choose the destination location as C:/Program Files/VW_PDUAPI_OS folder and wait until the setup installation is finished.
It should be fine. Run ODIS-S software again. Select VCI type as VAS 6154.
VXDIAG VCX SE 6154 Setup Guide
Allscanner VXDIAG VCX SE 6154 VW Audi Skoda Seat diagnostic scanner VCI setup guide.
Part 1: Install Driver and Update Firmware
How to install vx manager, driver and update firmware for VCX SE 6154?
Download vx manager here
http://www.vxdiag.net/managecenter/download/vxdiag.zip
After installing ODIS software (ODIS installation guide), run VX Manager, select Passthru and 15-VAG-ODIS 6154 driver and press next to finish installing vx manager.
Connect VCX SE 6154 with laptop via USB cable.
Run VX Manager on the desktop.
There is no device detected. Press-Re-connect. Now it will see your 6154 device.
If there is a “+” in Firmware, run firmware update.
Go to the Diagnostic tab. Check if VW 6154 driver is installed.
If there is a purple “+” icon of the driver, you need to update driver.
Part 2: Update License.
If software says the License expired.
Run
VX Manager, check the License.
If the valid day is 0, go back to Device
Information and update License.
If don’t have network connection, VX Manager will say “offline, Download License failed”.
Close
VX Manager.
Connect network.
Run
VX Manager and update license.
The
license won’t expire but needs to be renewed every 60 days.
Part 3: How to Connect VXDIAG VCX SE 6154
VCX SE Connects via USB, WiFi and LAN cable.
1. Connect via USB
Connect VCX SE with laptop via USB cable, and connect another end to vehicle via OBD socket.
Go to Device Manager->Network Adapters. If you see Realtek USB FamilyController, it means the device is well connected.
If not, unplug the USB cable and firmly insert the vcx se.
2. Connect via WiFi
Connect VCX SE with the vehicle via OBD port, don’t connect USB cable.
Turn
on the ignition with working key.
Hit Network icon on the bottom right of your PC.
Find WiFi
name DoIP-VCI-XXXX and choose auto connection,
Pair WiFi
with password: 12345678
3. Connect VCX SE with LAN cable
To connect VCX SE via LAN, you also need a USB Type-C to RJ45 LAN converter which is included in the package.
Part 4: How to configure VCX SE for Software
How to configure VCX SE 1645 for ODIS Engineering Software?
Configure->Device-> Choose device as VAS 6154
How to configure VCX SE 1645 for ODIS Service Software?
Tools->Device-> Choose device as VAS 6154
https://www.vxdiagshop.com/service/how-to-set-up-vxdiag-vcx-se-6154.html
Honda HDS No VXDIAG Device Selection Solution
Problem:
Got the VXDIAG VCX SE Honda HDS 3.105.012 software installed. Run software but didn’t see the VXDIAG communication interface selection.
Solution:
You have installed the wrong driver.
Install Honda driver in VX Manager, and follow instructions to install Honda HDS (i-HDS) software.
Run i-HDS software on the desktop, you will see device selection option. Select the device type as VXDIAG.
Follow the instructions here to install Honda HDS software
How to Configure VXDIAG Benz with DTS Monaco 9.02?
How to set up or configure DTS Monaco 9.02 with VXDIAG VCX SE Benz DoIP VCI?
DTS Monaco 9 vxdiag vcx se DOIP connection configuration
VCI Name: VCX_SE (VCX_DoIP if it is a Benz
C6 VCI)
Bus System Interface: D-PDU API
D-PDU API Version: Bosch
D_PDU_API_Bosch_MTS6532
Module Type: Module_Type_ID_MTS6532
Cable:
Bosch_VCI_HD26_TO_J1962_DP_2
Or try this
VCI Name: VCX_SE (VCX_DoIP if it is a Benz C6 VCI)
Bus System Interface:
D-PDU API
D-PDU API Version: Bosch D_PDU_API_Bosch_MTS6532
Module Type:
Module_Type_ID_MTS6532
Cable: OBD_STDCABLE_ONLY
Same configuration steps goes to DTS 8.16.
If there is no MTS6532 option when configuring DTS 9.02 or 8.16, check the solution here: