VXDIAG Benz C6 Cannot Turn off Flight Mode Solution
The problem goes like this:
” My vxdiag benz c6 connects no problem via LAN cable. But it failed to connect via WiFi and does not allow me to disable Flight mode either. Windows 10 cannot find Wifi devices on this PC. Any idea how to fix it?”
Solution:
The problem was caused by missing a WiFi driver.
Our Xentry HDD does come with the Driver Genius. Sometimes it is not compatible with your operating system due to various configurations.
Connect network via LAN cable. Send Teamviewer ID and password to us.
Our engineer will help update the WiFi driver.
WiFi wireless connection is working fine now.
Contact us:
VXDIAG Benz C6 Cannot Turn off Flight Mode Solution
The problem goes like this:
” My vxdiag benz c6 connects no problem via LAN cable. But it failed to connect via WiFi and does not allow me to disable Flight mode either. Windows 10 cannot find Wifi devices on this PC. Any idea how to fix it?”
Solution:
The problem was caused by missing a WiFi driver.
Our Xentry HDD does come with the Driver Genius. Sometimes it is not compatible with your operating system due to various configurations.
Connect network via LAN cable. Send Teamviewer ID and password to us.
Our engineer will help update the WiFi driver.
WiFi wireless connection is working fine now.
Contact us:
How to Fix DTS Monaco Coding Error F1?
Problem:
I am learning to use DTS Monaco with vxdiag benz c6 drip vci. Today I built a workspace for the audio controller on my 2021 447 Van. I can connect to it (HU447) and read the coding. But, if I change any setting and then try to write the coding back, I get error NRC = F1 cannot write coding.
Any input on what the error is and what I need to do to rectify this would be appreciated.
Solution:
Error code F1 from a control unit means that there is a firewall blocking the correct communication between the control unit and your diagnostic device (vxdiag c6 here).
In order to temporarily disable the firewall, you need to go to the vehicle’s EZS, using the correct SMR-D, and unlock the security level 3B.
Remember that once you give up the diagnostic connection to the EZS, the firewall will be right back.
It is therefore a good idea to open a DTS Monaco session, using the ECU files you need + EZS, and leave the EZS connection open, while doing your stuff.
How to Find VXDIAG C6 DTS Monaco CBF Files?
Question:
I am using Allscanner VXDIAG Benz C6 doip device with Mercedes W211.
I need to flash programming but can’t find W177 file.
First i use LAN cable but DTS Monaco don’t show workspace then i use USB cable it shows workspace but can’t find w177.
How to set up an interface in DTS monaco 8.13.029 ?
Should I use USB or LAN?
Solution:
1.How to set up DTS Monaco for VXDIAG C6?
http://blog.vxdiagshop.com/2019/02/27/set-up-dts-monaco-for-vxdiag-benz-c6/
2. VXDIAG uses USB connection when run DTS Monaco.
3.
vxdiag needs to configure CBF to work.
If you have W177 file, do following to find the CBF file:
1). How to find CBF/SMR-d file:
CBF and SMR-D both access Licenses files.
CBF is available for old cars, includes 117, 156, 163, 164, 166, 168, 169, 170, 171, 172, 176, 203, 204, 207, 209, 211, 212, 217, 218, 219, 220, 221, 245, 246, 230, 231, 251, 292, 240, 450, 451, etc.
SMR-D is suitable for new cars, includes 205, 253, 222, 453, etc.
CFF and SMR-F are programming files. CFF file is corresponding to CBF programming file, and SMR-F is corresponding to SMR-D programming file.
SMR-D file path: C:\Program Files (x86)\Mercedes-Benz\Xentry\ Kontexte\ODXProjekte\PKW_COMMON\dbr
CFF and SMR-F file path: C:\Program Files (x86)\ Mercedes-Benz\SDFlash\Release\PKW
The best solution is to create for each cariine one folder and put the corresponding CBFs inside.
WIN7system:
DAS CBF : C:\Program Files (x86)\Mercedes-Benz\DAS\comdat\pkw\cbf
Xentry SMR: C:\Program Files (x86)\Mercedes-Benz\Xentry\Kontexte\ODXProjekte
Xentry CBF: C:\Program Files (x86)\Mercedes-Benz\Xentry\MB_PKW\Caesar\cbf
CFF file： C:\Program Files (x86)\Mercedes-Benz\SDRash\Release\PKW
XP system:
DAS CBF: h\Programme\DAS\comdat\pkw\cbf
Xentry SMR: F:\Programme\Xentry\Kontexte\ODXProjekte
Xentry CBF: F:\Programme\Xentry\MB_PKW\Caesar\cbf
CFF file :F:\Programme\SDFIash\Release\PKW
CFF file:E:\Programme\SDFlash\Release\PKW
If you don’t have W177 file, you need to connect w177 vehicle and import 177 CBF file.
2). How to import CBF file:
Select “Daimler database files (*.CxF)”,then click “Next”
Click “Add” button
Mark all CBF file for your carline
Then click “Next” to continue
Select project name and database format,then click “Next” to continue
After then click “Finish”
Now check the number of imported CBF files.
http://blog.vxdiagshop.com/2021/08/20/vxdiag-benz-c6-cannot-find-cbf-file-in-dts-monaco/
2021.6 VXDIAG Benz C6 No Connection Solution
The problem goes like this: I just try to read fault codes with vxdiag Benz c6 new 6-2021 xentry version, but the VCI can’t make connection to car (W212).
Opens normally and start making connection, popup says VCI available But when starting diagnosis don’t connect, comes initialization of multiplexer failed fault info screen. See pic attached
VX Manager seems good, and I have update VCI and make reconnecting, nothing don’t help.
Vxdiagshop.com working solution:
The problem can be solved by installing the new patch.
Download Xentry Patch 2021.06.exe within the VCI client here
https://mega.nz/folder/FYl0RKRL#JHZETHntbTflzNWfFr9NMw
Feedback:
I made that. Now it works. Thank you.