VXDIAG Nissan V241 Asks for PC Authentication Solution
Problem:
During the installation of the VXDIAG VCX SE Nissan Consult III Plus V241 software, the system prompts for PC authentication. Where can I obtain the required user ID and password?
Solution:
This issue is likely related to the laptop or operating system being used. The Nissan Consult III Plus V241 installation process does not require a user ID or password.
Check the installation instructions here:
http://blog.vxdiagshop.com/2024/06/28/free-download-vxdiag-nissan-consult-3-plus-v241-software-and-patch/
Feedback:
After a TeamViewer diagnostic session, it was discovered that the software was conflicting with Panasonic Toughbook drivers. Switching to a different laptop and reinstalling the software resolved the issue.
VXDIAG SSM3 Failed to Connect Subaru Forester 2006 Solution
Problem:
The VXDIAG
VCX SE Subaru SSMIII software failed to communicate with a 2006
Forester, displaying the error: "Communication initialization
error occurred."
Solution:
After a TeamViewer diagnostic session, an engineer
from Vxdiagshop.com discovered
that the issue was caused by a virus infection on the user's computer
system.
Feedback:
Switching to a different laptop resolved the issue, and the software now works perfectly.
VXDIAG Multi Tool No DoIP Information Solution
If you are using an older version of the VXDIAG VCX Benz Multi Tool (the large DoIP device) and encountering issues where the VX Manager cannot detect DoIP information and fails to update the firmware, you can manually update the DoIP firmware using the DoIP Update V1.5.9 tool. This guide will walk you through the process.
Applicable Devices:
This method applies to older VCX DoIP devices with serial numbers starting with V71XN***.
Steps to Update DoIP Firmware Manually:
Download the DoIP Update Tool:
-
- Visit vxdiagshop.com to download the update_doip_1.5.9.exe tool. This tool is specifically designed for manual firmware updates on older VCX DoIP devices.
Run the DoIP VCI Update Tool:
-
- Once the tool is downloaded, run the update_doip_1.5.9.exe on your computer.
Update the Firmware:
-
- Update firmware if VCX DoIP
Sync the Software:
-
- Sync Xentry version.
Will VXDIAG VCX FD GDS2 do Chevrolet Blazer EV 2024?
Will VXDIAG VCX FD GM GDS2 Scanner diagnose a Chevrolet Blazer EV 2024 electric vehicle?
Set up software, select the VCI as MDI but it cannot read VIN. Any idea?
Solution:
Disconnect and exit the software.
Restart GDS2 and choose the VCI device as MDI2.
It will now read the VIN and diagnose the vehicle.
For this vehicle, you may require the latest GM global data version. In this instance, it is 2024.05.08.
Will VXDIAG VCX FD GM GDS2 Scanner diagnose a Chevrolet Blazer EV 2024 electric vehicle?
Set up software, select the VCI as MDI but it cannot read VIN. Any idea?
Solution:
Disconnect and exit the software.
Restart GDS2 and choose the VCI device as MDI2.
It will now read the VIN and diagnose the vehicle.
For this vehicle, you may require the latest GM global data version. In this instance, it is 2024.05.08.
VXDIAG Benz WIS EPC VMWare Error 462 Solution
Problem:
Failed to run VXDIAG VCX SE Benz EPC and WIS software on the desktop.
When attempting to run the EPC (Electronic Parts Catalog) software, an error message appears: "Error 462: EWS session token has expired." Additionally, the WIS (Workshop Information System) software fails to run on VMware.
Any solution?
Solution:
Run WIS_WEB software instead from EPC and WIS icon.
Make sure your laptop VM-support is enabled. Go to Bios and enable Secure Virtual Machine (SVM). Then run WIS again.
It should be working fine.
If you are able to start WIS but no show wiring diagram, new patch will fix it.