VXDIAG VCX SE Cannot Read JLR DoIP Module Solution
Problem:
The vxdiag vcx se JLR DoIP device only reads VIN and vehicle information of the Range rover L494 MY2017, it cannot access/scan any modules. Any suggestion?
Solution:
Turn on JLR DoIP switch.
If vx manager detects the device but DoIP config shows nothing, restart computer, disconnect vcx se for a few minutes, then plug the device, turn on DoIP switch and try again.
If DoIP switch still not working, there is a problem with the DoIP module. Contact your dealer to see if your vcx se need repair.
VXDIAG VCX SE OBD Indicator Not Turn on Solution
Problem:
My vxdiag vcx se Benz device was not detected by vx manager (no device error). The vx manager version is up-to-date.
OBD indicator on the vcx se unit did not turn on. Any advice?
Solution:
OBD indicator does not turn on which means there is no communication between device and OBD.
Unplug vcx se, connect it with OBD and PC again. It will work.
If OBD indicator still not turning on, this is a faulty device.
Better have your dealer check your device and decide if it requires repair.
How to Solve VXDIAG Renault Register Problem?
Problem:
I have a problem registering vxdiag vcx nano Renault software.
Notice as attached:
"An unhandled exception occurred in the application.
Error Access denied to path .COOp Extra Func .dl"
Solution;
Just press "Continue" and ignore the error message.
You will be able to generate activation key by keygen.
