FreeSSM is a free and easy to use diagnostic and adjustment tool for SUBARU vehicles. It provides access to the engine and transmission control units of the models Legacy/Liberty, Outback, Baja, Impreza, Forester and Tribeca (not before MY1999). 1.2.5 version is the latest. Possible to use the FREESSM software with VXDIAG VCX SE?
The answer is NO. The best cable for FreeSSM is the cheap $10-$20 VAG-COM KKL 409.1 OBD2 USB cable. It is a cheap cable with FTDI chip.
VXDIAG VCX SE does not work with the FreeSSM software. VCX SE only works with SSM3 and SSM4 software. vag-com is not going to work SSM3/SSM4 software. SSM requires J2534 standard compliant adapter. vxdiag is j2523 compliant – vxdiag can be used instead of openport cable. Vxdiag vcx se Subaru works well with ssm3 and ssm4 the vcx se also has a wired cable you can use.
Check: FreeSSM vs SSM3
Neither FreeSSM nor Romraider will connect to the modules in a 2021
Subarus. only some earlier models are supported.
So you have better keep both
VXDIAG SSM3/SSM4 and FreeSSM.
VXDIAG VCX NANO and VCX SE Nissan scanners updated Nissan RNM VCI driver to support reprogramming function.
Nissan RNM VCI Driver for Consult3-P
Nissan Driver Update History
2024.06.25 v05.00.240625
Support reprogramming
function (Requires Nissan Consult 3 plus V235).
Another new update of Nissan driver is that you can install Nissan driver on VX Manager now. No need to install Nissan driver separately as previous version.
With the new driver and v235 software, the reprogramming function is fixed.
Problem:
One of our customers reported he could not start the ISTA-P 68.0.800 software from vxdiag VCX SE BMW software HDD.
ISTA-P gave a fault code: unable to start a new session.
There is an ‘ISTA-P FIX‘ program on the desktop.
Run the Fix tool and recover ISTA-P and run software again. It should be fine.
www.vxdiagshop.com
Question:
When starts BMWCoding Database program of the vxdiag vcx SE BMW software HDD on the desktop, it asks for an user name and email. Where to get user name?
We don’t provide user name and email. You should have your own login account (subscribe to BMW Coding Database).
BMW Coding Database is a collection of coding values and instructions that can be used to customize BMW vehicles through software upgrades.
BMW Coding Database is a comprehensive tool designed to assist BMW car enthusiasts with customizing and reprogramming various functions in their vehicles. This database provides access to relevant codes and procedures needed to make modifications to a BMW’s electronic control module (ECM), including features such as comfort access, alarm settings, lighting options, and much more.
The cost to subscribe to BMW Coding Database varies based on the length of the subscription and the specific package selected.
One of our customers tried to program a Nissan Qashqai J11 MY2013 ECU
engine module with VXDIAG
VCX SE Nissan device and online
subscription.
During the programming procedure, the Consult3+
software stuck and failed to program.
Try again but still the
same problem.
Consult finds 2 firmware updates for the engine.
This is where everything froze, waited for the promised 15 minutes for about an hour or a little more. No luck. Try again still same problem.
Solution:
VCX does not support online programming for
Nissan pre-2010. 2010-2013 need luck. 2013 onwards Nissan has no problem with
online subscription.
But you need a proper Consult 3 plus version.
Version V226 is not
recommended for programming (a few reported the software will get stuck during
the programming procedure).
Version V235 fixed the programming
issue.
If you need V235 software, contact our customer service to
send you a download link (provide order number and VCX
SE serial number).