VXDIAG Vauxhall Tech2Win 182 Bin File
The Tech2win is for older cars from about 1992 on the North American side up to 2008, for the Vauxhall we use a little bit later so it will be about 1996 or 1998 up until 2012 up to the Insignia platform then they started moving over GDS2.
Vxdiag vcx nano gm tech2win does not work on Saab nor Opel. VCX nano does not with Saab properly even with bin files, it does not work well with the mdi very well either. It requires a lot of BUS protocol that MDI cannot emulate. It does work on Opel/Vauxhall with proper bin files.
Vauxhall 182 is the latest and most stable version as it is known to all. 137 is good sometimes.
VCX NANO does not have Opel Tech2win bin files. You need to find yourself.
For example:
Opel Tech2Win PCMCIA V182 Spanish:
https://drive.google.com/file/d/0B_C4k-_wPmotM3lFYXRSV09WODQ/view
Password:mhhauto.com
Tech2win 32MB PCMCIA Card V182.000 English:
Part 1: https://mega.nz/#!QPYU2B5J!JvOBKyrB1bqpXuUXC8gJU8_HCAAtc3PTLwHMRGWkPz4
Part 2: https://mega.nz/#!MKIREarI!qjW5E_DD0n1UjwAYGkZyythcWj5U3qqYTDWKYmz5c7k
Password: mhhauto
*You are at your risk. We don’t take the responsibility for the damage.
Test Vauxhall 182 with vxdiag tech2win:
Connect vcx nano gm interface with laptop
Run vx manager, you can see it is connected and it is showing its serial number
Do a quick device test, update the license and firmware to the latest
version
Now we go configuration of the Tech2win
and you have numbers of
different rom files which give you different access to different
vehicles
even though this is the Vauxhall platform can be used
We click Vauxhall 182 you will get a TECH2WIN Screen pop-up
you select the
top one MDI-USB
if it is black means vcx nano is not connected
Connect vcx
nano via USB
and it comes to the screen here TECH2
Now select vehicle, model and function you need to perform.
http://blog.vxdiagshop.com/2022/07/19/free-download-opel-vauxhall-tech2win-182-bin-file-for-vxdiag/
How to Unlock GM LAN29 Radio by VXDIAG Tech2Win?
Let’s say you bought one of these vxdiag vcx nano gm or mdi clone interfaces and you are trying to program a new radio in your GM LAN29 because you get the ‘lock’ message. You want to have a free range to unlock radios but you are having trouble finding anywhere the menu.
Vxdiagshop.com here gonna show you the secret to unlock GM Radio.
Device required:
Tech2Win 30.004
Free download GM NAO V30.004
https://mega.co.nz/#!fUBQHLYY!1xmrJPOG6-vV2oem_gGwKxaJpf31I01VHZisDHCPRio
Click on the link, then look for the password at the bottom of that group of links.
2). Here the customer has installed a MyLink radio out of 2013 Traverse into a 2015 Impala limited.
3). You have to roll back the Tech2win software version to 30.004. The vcx nano now comes with T2W 33.004 and in that version all the vin unlocking for the radios is completely erased. You can search the youtube guide to roll it back.
The software included with the VCX Nano or cloned MDI has a version of Tech2Win that has eliminated the capability to program the proper VIN to a “new” radio. In fact, reprogram radios after you roll back the firmware version of the Tech2Win software. This is mainly for GM LAN29 vehicles from 2006 to 2017 such as the Impala, Tahoe, Traverse, Silverado, Lucerne, and their corporate cousins.
You can keep original 33.004 in case you want to go back.
4). The original firmware version 33.004 that came with the VCX Nano is not deleted when you follow the procedure to roll back to 30.004. When you initialize the Tech2Win program, click on “North American” to run 33.004 (which you have to do for newer Impalas, as 30.004 only goes to 2011.). To use 30.004, click on “GM NAO.” They both co-exist without any other tweaks. For instance, you want to program a new radio and new key fobs to a 2012 Impala. You will need to run “GM NAO” (30.004) on the Tech2Win to program the radio. After that you will have to exit out of Tech2Win, restart it, and run “North American” (33.004) to program the key fobs.
Procedure:
Get the vcx nano hooked up to the USB.
Turn on ignition switch.
Run the vx manager, go to Tech2Win
you’ll see that as soon as it boots up here, see that 30.004. you need this version
the other thing is you have to use this keypad, you can’t click on whatever’s on the screen on
this version doesn’t work.
we’re going to set the car up
if tech2win asks to tech2 software may need to be updated, we don’t care, just proceed.
Select Diagnostic- 2006- Passenger Car- Chevrolet, scroll down to select W line
We’re gonna set it as a Monte Carlo ltz
Then select Body and Accessories- – Entertainment- Module setup- F0 Radio- VIN Relearn
make sure you hooked up right here
We’re getting communicating okay
vxdiag vcx nano tech2win ask if you want to clear radio theft information.
Press ENTER to begin clearing.
Cycle the ignition. Radio theft info. was erase.
Exit out of that prompt and disconnect vcx nano.
Now it is working
It works. Turn the volume down.
VXDIAG VCX NANO Review on Isuzu 4jx1
April 30, 2021:
Just wondering if anyone has used the VXDIAG VCX NANO for GM/OPEL GDS2 Tech2WIN Diagnostic Tool on the Jackaroo 4xj1. From what I have heard it works with the 4jx1.
May 12 2021:
it arrived today but unable to get the tech2win to pull the data from the vcx nano.
Everything seems configured correctly however the only 4JX1 option i can find is under Opel – Monterey but says no communications with the vehicle.
I however see in the VXManager that the OBD2 is connected and its reading my car’s voltage.
May 13, 2021
Reinstalled following these instructions: http://www.vxdiagshop.com/service/how-to-install-vxdiag-vcx-nano-gm-tech2win-on-windows-10-6027.html
set it up ok on Windows 10.
and now its communicating with the engine. Using the opel bin you choose 1998 > Monterey > 4JX1.
Fun fun.
June 16, 2021:
I have been using this to check display data for a few weeks now. I was wondered if the injectors were enabled. Well it turns out that the GM>1999>Monterey>4jx1 3.0 (v6 engine is only other option) does not have the same parameters or the .bin file that is in question is outdated. It has oil rail pressure, crank , orpcv and more totaling to 43 parameters. No injector status though.
My mate has got the injector status on his program. I am looking for a .bin file of the isuzu Kline card .
June 25, 2021.:
I got the bin file of Isuzu Kline somewhere. (attached below)
This is vastly different. I have injector status now.
Options entering the tech2 look more on par with screenshots I’ve seen online.
This is a cheap tech2 alternative now.
Here’s tip:
I open VX Manager, i use the reconnect and test device buttons to ensure its running and operating. I then plug it into the vehicle Obd2 port and proceed to open software shortcut: tech2win on the desktop.
You are able to select from a few different bin files. Such as China1 China2 North-America and so on.
Follow this way to get new bin listed:
Open the Tech2Win-Configurator, click ‘Create new…’. Enter a new name under ‘Please enter a new name’. Press ‘Copy’. Under ‘Slot 0: Memory card image location’ find the path to the downloaded BIN file. Click ‘Open’. Press ‘Save ###’.
When you next start the program your new configuration will be available to choose.
You get a popup prompt with two entries, i press enter to select the default option, then another popup which lists the usb device (another enter).
IS 11.710 32mb (1998-2011) .bin
http://blog.vxdiagshop.com/2021/06/18/vxdiag-vcx-nano-isuzu-jackaroo-4xj1-working-experience/
Tech2win E667481 License Expire Solution
Feedback 1:
Hi, my vxdiag vcx nano Tech2Win was working no issue on Windows 10 system. Recently it reported an error saying the license expired or no exists.
Error: E667481 Your license has expired or does not exist.
Solution:
Update VX Manager driver to V1.8.4, update firmware and license.
Feedback 2:
I did all the above, updated VX Manager, firmware and license, this time Tech2win is blank and won’t show vehicle communication interface options.
Solution:
The new vx manager might conflict with your operating system.
Some people manage to run Tech2win on Windows 10 without issue. Some failed due to various Win10 configurations.
We recommend installing Tech2win on Windows 32bit operating system (except Home version).
Can VXDIAG GM diagnose 2008 Chevrolet Silverado?
Problem:
I need help. I cannot find 2008 Chevrolet Silverado in vxdiag vcx nano GDS2 nor tech2win. T2W shows 02/03 Silverado only and GDS2 supports 09 up models.
What is the path for 08 Silverado?
Vxdiagshop.com solution:
In Tech2win software, select North American and you will see.
FYI:
Tech2win supports GM pre-2008 (Does not support Opel/Saab).
GDS2 supports GM from myear 2008 to 2020.
https://www.vxdiagshop.com/service/gds2-gm-vehicle-list.html