Free Download VXDIAG VCX FD VX Manager 1.8.9 Beta
Allscanner VXDIAG released new VX Manager 1.8.9 Beta version driver for the new VXDIAG VCX FD (CAN FD) series scanners.
Adapt to VCX FD device
Update:2024-01-12
Free Download VCX FD VX Manager V1.8.9 Beta
Operating system: Win10 (better not on Win7)
V1.8.9 Beta Update Feature:
Update Integrated update VCI SDK v2.0.0.0
Added VCX-FD
device 6821 port 100M network communication (4K transceiver test up to
35Mbps)
Optimize 6820 port network communication for all series of devices
(speed increased by 100%)
Optimization: Users can automatically connect after
modifying the device IP address without configuration.
Optimization Generate
independent log files for each application (name example:
VCX.AppName.exe.log)
Added SR9900A USB network card driver 10/14/2019,
2.0.5.0
Update WCH USB driver version 1.7.2023.02
How to Install VX Manager 1.8.9 Beta for VCX CAN FD?
www.vxdiagshop.com
How to Set up VXDIAG VCX FD DoNET Remote Connection?
One of our customers had trouble with VXDIAG VCX FD workstation mode wifi connection.
Workstation mode does not mean you can connect VCX CAN FD via local WiFi router directly.
Workstation Mode WiFi Connection= DoNET remote connection.
You should have the DoNET Remote Connection License activated to the VCX FD.
Then configure DoNET connection. DoNET connection setting is the same as VCX SE/VCX DoIP. Just select Connect to Router WiFi if in workstation mode.
Tutorial: VXDIAG DoIP device DONET Settings
https://www.vxdiagshop.com/service/set-up-vxdiag-vcx-fd-workstation-mode-wifi-connection.html
How to Change GM PSCM VIN by VXDIAG and DPS?
VXDIAG VCX NANO GM latest software contains free DPS 4.52 software. You can change the VIN number in the power steering controller with the DPS.
You can do this with DPS. If it's a new/virginized controller – can be done with SPS2 too.
NOTE: DPS is just a TOOL. You won't achieve anything without appropriate RESOURCES (files). We don't provide calibration files, need to find files by yourself.
Here is an example of changing PSCM VIN on a Chevrolet Orlando 2015 using DPS.
Run GDS2, Diagnostics
Select K43 Power Steering Control Module
Read
DTC
It displays fault code C0565 VIN not plausible.
Go back to GDS2, select Identification information
Check the VIN
number
It is different from the original VIN
Go back to Diagnostics, Copy VIN
Run DPS
software
Select Cal
Upload VIN change calibration file
Get Controller Info
Copy VIN here
Press Program
Enter programming mode
Program successfully
Go back to GDS2 Identification Information
You can see the VIN number has
changed.
VXDIAG Update BMW Driver for ISTA 4.46
VXDIAG release new BMW ICOM driver on April 3rd, 2024.
BMW ICOM Driver update history
2024.04.03 V1.4.7.240403
BMW ICOM device version update to support ISTA 4.46 software.
Go and update BMW driver in vx manager.
If VXDIAG BMW has no communication after driver upgrade, try the solution here:
VXDIAG 2TB HDD SSD Benz Xentry Update to V2024.03
VXDIAG 2TB HDD/SSD full brand software VXDIAG Benz Xentry update to V2024.03 in April, 2024.
We also added Nissan, Renault and PSA software into the 2TB HDD/SSD.
The 2TB HDD/SSD now contains 16 car brands software, including:
BMW ISTA-D 4.39.20, ISTA-P 68.0.800
BENZ Xentry/DAS:
2024.03, DTS V8.13.029, 9.02 (does not support truck)
VW/AUDI ODIS
Service V23.01, Engineering V17.01
JLR SDD V164
JLR Pathfinder V374
Piwis -II V18.100.000
VOLVO 2014D
FORD IDS
V130
MAZDA IDS V131
GM GDS2 Glabol V2023.10.19/ China 2023.10.19, Tech2win
23.002
TOYOTA Techstream V18.00.008
HONDA HDS V3.105.012
SUBARU SSM3
V1.57.71.8 (2019.4 ), SSM4 V28.6.0 (2022.1)
NISSAN
v226.50
PEUGEOT v09.85
RENAULT
v219
*Porsche tester III software is not included.
2024.03 VXDIAG Benz Xentry Desktop
Win10 Pro 64bit system
Multi-Language
Version information
NOTE: 2024.03 for cars only. Does not work on Benz trucks.
Nissan Consult iii plus V226 was added to the 2TB hard drive
Renault Clip V219 was added to the 2TB hard drive
PSA Diagbox 9.85 was added to the 2TB hard drive as well
