VXDIAG Adds Ford Bronco Keyless Entry with FDRS
How to add a Keyless Entry to Ford Bronco or other new models without any dicking around from the dealer.
Tools you need:
Keyless Entry Keypad KB3Z-14A626-A (FOR BRONCO WITHOUT REMOTE
START)
Keyless Entry Keypad KB3Z-14A626-B (FOR BRONCO WITH REMOTE START)
VXDIAG VCX NANO Ford J2534 adapter
https://www.vxdiagshop.com/wholesale/vxdiag-vcx-nano-for-ford-mazda-2-in-1.html
And the Ford FDRS
Software:
https://www.motorcraftservice.com/diagnostic/Support?channelId=51&categoryId=304
And it is super easy to do with FDRS Software from Ford's website. You need to get a 2 day license for the software ($50).
You will need the Keyless Entry Pad, internet access, the FDRS license, a Ford login account, and Internet access in order to install the Keyless Entry. NOTE: When you buy the license it doesn't make your account. So that was an extra step. (I actually installed all the FDRS,FJDS, IDS, and VCI software)
I installed the license in FJDS only to find out that FJDS doesn't work on the Bronco.
After intalling the FDRS software, the VXDiag VX Manager Software, and the
J2534 Adapter;
Start the FDRS software.
Open FDRS, log into your account
using FDRS
Look for the Keyless Entry Programming section and download that
routine from the net.
Make sure the vehicle is off, and start the module,
follow the instructions.
Power on vehicle when prompted.
Enter the six
digit serial number when prompted.
Test the Keyless Entry Lock when
prompted.
Turn off the vehicle when prompted.
Test the entry
code.
Program your new personal code if desired.
Test your personal entry
code
press 7-8/9-0 to lock your vehicle.
You are done.
It was really quite easy! Hope that helps anyone who wants to tackle this.
