"SOLVED: VXDIAG VW ODIS 9.1.0 "exceeded 50 trail
Here comes the working solution toVXDIAG 2TB VW ODIS 9.1.0trial period expired issue.
Error:
'Your trial period has expired.
You have exceeded 50 trial executions.
Please register this software to remove trail limitations. '
.jpg)
Solution:
Download and install odis 9.1.0 unlimited trail patch here to fix the error
https://mega.nz/file/HIoxHYbQ#lwgGN6jgyuwEAfnSVL8HOBW7Kpn0JWTGCti6WjVuTxQ
How about Xentry Passthru? Tested on Mercedes W212
Why the Xentry Passthru is interesting?
If you are keen to do proper Xentry grade health scanning, but not coding say
for START STOP be gone, but can do lots of TEST, you can get Xentry PassThru
version.
Because the J2534 interface device is cheap and small like an OBD2
dongle, i.e openport 2.0 and vxdiag
vcx se benz. vcx se benz is quite recommended. It works with both Passthru
and OpenShell. It also supports WiFi connection and communicates much faster
than openport. (Check: VXDIAG VCX SE or
Openport 2.0 for MB Xentry Passthru?)
So if you already have a Windows 7
or 10 laptop, some effort at Google or Youtube to search, you will surely find
Xentry Passthru download resource.
This is a 2014 Mercedes W212 E400 ( M276 Dela 30, 3 liter Turbo) RWD not Hybrid and well tested with Xentry Passthru.
So in case NICE people wanna learn more about the cars…… find some teasers below :
Health scanning 100% all modules read.
You can do air conditioning 7 way venting ( air distribution )…which always wanted for the LEG + BODY
Yes, LEG + BODY air distribution possible now. BTW using AUTEL MS906BT I have disabled the stupid FRESH AIR FLAP WILL OPEN NO MATTER WHAT…AFTER 30 MINUTES. Now it remain closed.
This is good
Data gold-mine. Now we can know how and when a certain code made it to be a CEL/MIL. No more guessing a 3rd party scanner interpretation of a DTC code actual meaning… we use the MB ones
OK enough teasing around.
Let me remind again. YOU CAN NOT DO CODING with this naughty Xentry PassThru.
VXDIAG VX Manager Error Find New Version 1.8.7?
Problem:
I have a problem with my VXDIAG VCX SE Benz and Xentry 2021/12 which tells me the VCI has a too old version. It says a new version 1.8.7.0415 was found.
If I click OK and I'm connected to the Internet, I'm getting the following errors:
System error, cannot find MSVCP140D.dll
When I start VCX Diag I'm getting another error. Any idea how to fix it?
Solution:
DON'T Update VX Manager to V1.8.7 in VX Manager Directly!!!
Download VX Manager driver 1.8.7 from vxdiagshop.com and install.
https://www.vxdiagshop.com/info/download/
Feedback:
I was able to download the 1.8.7.0415 version from your website and install it. Afterwards I was able to upgrade the VCI Firmware from 1.8.4.0 to 1.9.1.0 and also the DoIP from 1.8.1 to 1.9.0.
Since then I have no errors anymore. Thanks.
VXDIAG Benz WIS_EPC Not Working Solution
One of our customers failed to open VXDIAG Benz WIS/EPC and StarFinder software. Our customer helped him out via Teamviewer. Hope it helps if you have the same problem.
Don't change your computer's default browser. In this case, he has changed the default browser from Edge to Firefox.
Follow the steps below to run WIS EPC on firefox. Same procedure with other browsers.
Right-click WIS_EPC desktop shortcut on the desktop
Go to
Properties
Copy and Paste the URL
Open WIS_EPC
Paste URL here
Login with User name (admin) and password (12345)
Read also:
VXDIAG VCX DoIP Firmware Update V1.9.0
Allscanner VXDIAG VCX Scanners released a new DoIP Firmware update on April 25th, 2022. With this update, VXDIAG is compatible with BMW ISTA-D 4.34.xx version.
2022.04.05 DoIP Firmware V1.9.0
- Update device gateway address
- Update vcx-icom package, Supports BMW ISTA-D 4.34.xx new version
- Update vcx-doip package, optimize multiple DoIP entities
- Update vcx-pt3g package, Suppurts new device address.
- Fix bugs.
After updating DoIP firmware, if the device cannot be connected, check whether the device manager software is up to date.